Category: Tutorials
-
How to Use a Tecnomagnete QX303UMK6 EPM Chuck with an ST120F (ST100) Controller
My solution to connect an Tecnomagnete QX303UMK6 EPM (Electro-Permanent Magnet) chuck to an ST120F controller.
-
How to Disable the Chuck Shield Safety Switch on Mini Lathes
How to disable the chuck shield disconnect switch on Vevor (and other) mini lathes.
-
How to Convert .NC to .JG for Suda CNC Machines
An explanation of how to convert g-code files to .jg files for use with Suda CNC machines.
-
How to Install ROS2 on a Raspberry Pi 5
This is how you can install ROS2 (Jazzy Jalisco) on a Raspberry Pi 5, easily and without using Docker.
-
Tripling Kindle Paperwhite Battery Capacity
I modified an 11th generation Kindle Paperwhite with a battery 3.3x larger.
-
How to Run Lytro Desktop Software on Windows 11
If you’re here reading this, it is probably because you bought a Lytro camera and you’re having trouble getting the Lytro Desktop software to run on Windows 11. I was in the same boat, but I found a solution! This will let you import the photos from your Lytro camera (both the Illum and the…